Typically, the Home Screen will display the active operational mode, the desired room
temperature set-point and the heating status. Any of the Advance function which are
active will also be displayed on the home screen. Pressing
ENTER
while on the Home
screen will display the current time.
Target room temperature (set-point)
display,
this is not an actual room
temperature display.
Product heating status display,
this
indicates when the appliance is actively
heating or maintain a room temperature,
‘ON’ will be displayed. Otherwise, ‘OFF’
will be displayed
Active mode display,
the active mode of
operation is displayed at the bottom of
the screen
Sleep mode,
when the remote is left
inactive, the remote display will sleep,
turning the screen off . Briefl y hold
ENTER
to wake the remote back up.
The remote control will enter sleep mode if left idle for the following intervals
Home Screen – Sleep after 10 seconds
Menu Screens – Sleep after 15 seconds
Settings – Sleep after 30 seconds
NOTE:
When the remote wakes, it must search for and re-connect with the heater. This
happens automatically and is indicated by the connectivity icon and the pairing
graphic. Once pairing is complete the product will beep and the remote home
screen is visible.
Home Screen
18
Summary of Contents for AC3CE
Page 6: ...Fig 1 500 105 591 639 282 224 6 ...
Page 15: ...15 ...
Page 38: ...38 ...
Page 39: ...39 ...
