www.glendimplex.de
DOK4SVxxDEN · FD 9912
13
Domestic ventilation unit M Flex Air (Plus)
English
6.3 Vertical installation
The supporting feet are screwed onto the pre-punched cover
sections on the underside of the unit using the panel screws
supplied and are then aligned horizontally and vertically.
Fig. 6.4:Unit positioned vertically
To cover the visible supporting feed, a base plate for vertical in-
stallation can be ordered as an accessory.
6.4 Horizontal installation
The supporting feet are screwed onto the pre-punched cover
sections on the desired side of the unit using the panel screws
supplied and are then aligned horizontally and vertically.
Fig. 6.5:Horizontal installation with air duct connections to left (factory de-
fault, right-hand unit)
Fig. 6.6:Horizontal installation with air duct connections to right (converted to
left-hand unit on site)
!!
CAUTION!
When the air duct connections are aligned to the right, the
unit must be converted to a left-hand unit (siehe Kap. 5.3 auf
S. 8)!
For the condensate drain position, see Fig. 6.5 and Fig. 6.6
For horizontal versions, the side panel must first be broken out
at the pre-perforated location.
For use in cooled buildings, a vertically installed unit is prefera-
ble.
To cover the visible supporting feed, a base plate for horizontal
installation can be ordered as an accessory.
1
Ventilation unit with control unit
2
Supporting foot
3
Condensate drain (right-hand unit)
4
Condensate drain when using the unit in
cooled living areas
1
2
3
4
1
Ventilation unit with control unit
2
Supporting foot
3
Condensate drain
1
2
3
1
2
3
Summary of Contents for 3VSHCE
Page 2: ......
Page 53: ...www glendimplex de DOK4SVxxDEN FD 9912 51 Domestic ventilation unit M Flex Air Plus English...
Page 54: ...52 DOK4SVxxDEN FD 9912 www glendimplex de English Domestic ventilation unit M Flex Air Plus...
Page 55: ...www glendimplex de DOK4SVxxDEN FD 9912 53 Domestic ventilation unit M Flex Air Plus English...
