If an error code (Er 20) appears flashing on the remote screen,
this indicates that there has been an issue with the room
temperature sensor. Please contact customer service.
Error Codes
Maintenance
Battery Replacement
See Page 12 for fitting batteries.
NOTE:
Whenever new batteries are fitted or replaced the Bluetooth remote control will
automatically reconnect with the product. However, the time and date settings on the
handset will have been lost and must be reset for time profiles to function correctly.
IMPORTANT
Battery should be disposed of in an appropriate manner.
Cleaning
General Cleaning
Before commencing cleaning, isolate the heater from the electrical supply and allow it
to cool. External appearance can be maintained by wiping occasionally with a damp
cloth; for stain removal, a weak soap solution can be applied, then wipe dry. Care must
be taken to avoid any moisture ingress into the product.
WARNING - ALWAYS DISCONNECT FROM THE POWER SUPPLY BEFORE
CLEANING THE HEATER.
36
