5
3.3
Light Testing Mode
Testing mode is normally used during routine inspection, enter 1.2 “Test” menu and press the
“Send” button, the display will then show “OK” to indicate the testing mode was executed
successfully. In the testing mode, the lighting will light up and flash according to the flash code
for 5 minutes, after that the lighting will shut down automatically and back to normal operation.
3.4
Lighting ID Retrieval
Every lighting is carrying a unique ID code to differentiate different lightings. Enter 1.3 “ID”
menu and then press the “Send” button, the display will then show a string of 15 digits number,
this meaning the ID retrieval is successful.
