background image

2003 Sarena Bay

 

Export Owner’s Manual 

 

Dimension One “ EnviroTect” Skirts and Vinyl Covers 

The Dimension One 

EnviroTect

 skirts are unaffected by most corrosive substances, and will not absorb 

moisture.  To maintain the original finish, clean with soap and water. No sealing or painting is required. To 
maintain a “nearly original” appearance we recommend applying 

303 Protectant

 at least once a month on 

the Dimension One 

EnviroTect 

skirts and on the vinyl covers if they are exposed to direct sunlight.  

303 

Protectant

 is rated at 40 SPF (Sun Protection Factor). 

Care for the Wood Spa Cabinet 

When properly cared for, the wood cabinet of your hot tub will maintain its beauty for many years. All woods 
react differently to the elements by expanding and contracting. To protect your beautiful wood finish, re-stain 
it every 3-6 months with Dimension One Spas’ 

Redwood

 

or 

Coastal Gray Stain

, which serves as a good 

sealing agent for the wood. Please note that the cabinet is not warranted against reaction to natural weather 
conditions. The wood must be properly maintained. Should your hot tub cabinet require re-conditioning, try 
Dimension One Spas’ 

Wood Refurbishing Kit

.

 

Special Cold Weather Instructions 

Slipping into your steamy water on a snowy, winter night is a refreshing experience. Many times, people who 
could never imagine being outside in winter weather, find themselves spending their winter nights

 

doing just 

that, while relaxing in their hot tub with family and friends. Therefore, the best winterizing tips of all are to 
enjoy use of your system year-round

.

 

 

All systems manufactured by Dimension One Spas are designed for rigorous winter use. They are insulated to 
keep operating costs down and to protect plumbing and equipment whenever the products are operational. 
Each product line incorporates freeze protection mode to maintain water circulation during freezing 
conditions whenever the system has proper electrical power and water level. Therefore, a fully operational 
system is your number one defense against freeze damage. 

 

If you find it completely necessary to drain your water during the winter months, in an area where freezing 
conditions may exist, please adhere to all of the instructions in this section to minimize the risk of freeze 
damage. Failure to complete any of the steps satisfactorily will increase the chance of freeze damage, as small 
amounts of water trapped in pipes will expand as it freezes, and may result in damaged plumbing lines or 
fittings. 

 

 

Caution

 

 
Dimension One Spas does not recommend that you drain your system

 

for the winter. Freeze 

damage caused by winterizing your system is specifically not covered by Your Warranty. 

 

Items Required for Winterizing

 

• 

Phillips head screwdriver

 

• 

40.6 cm (16”) Channel-lock pliers

 

• 

High pressure air blower

 

• 

Commercial grade wet-vacuum

 

• 

11.37 liters (3 gallons) to 22.74 liters (6 gallons)

 

of Non-Toxic Antifreeze

 

• 

Strong, able-bodied people capable of lifting system 

 

Into upright position

 

• 

Enough time (and patience) to perform all steps.

 

 

 

41 

 

Summary of Contents for 2003 Sarena Bay

























































Reviews: