2003 Sarena Bay
™
Export Owner’s Manual
Routine Equipment Maintenance
Draining Your Equipment
Danger
Risk of Accidental Drowning.
Extreme caution must be exercised to prevent unauthorized
access by children. To avoid accidents, ensure that children cannot use this system unless they are
supervised at all times.
All models are gravity drained. Do not drain water onto your lawn or plants unless all of the bromine or
chlorine has dissipated from the water. The sanitizer in your water will dissipate quickly by leaving the cover
off and exposing the water to direct sunlight. Drain and replace your water every six months. For heavy water
use, you may wish to change the water more frequently.
Feature
You may purchase an optional submersible pump from your dealer or from our Virtual Showroom
at
www.d1spas.com
to provide quicker drainage.
Filter Cleaning
Before cleaning the filter element(s) place the spa in the “Standby” mode by pressing the Dimension One Spas
ICON logo
®
for 5 seconds. Your system is equipped with two top access filter cartridges. We recommend
that you clean the filters every month as preventative maintenance.
To clean the skimmer filter cartridge, lift the center float of the skimmer assembly until it is fully extended.
Hold the centerpiece of the assembly and turn it counterclockwise until the flats of the basket are aligned with
the securing tabs. Then pull the basket assembly straight up to remove. Next, remove the E-Z Lock Filter
cartridge by twisting the cartridge 1/4 turn counterclockwise to its stop. (Be careful not to overturn the filter)
Then lift the filter out of its canister. Clean the cartridge with a high-pressure garden hose. Every other
cleaning, soak the cartridges in a filter-cleaning solution, rinse it thoroughly, and reinstall. Replace the skimmer
basket assembly and the access lid or cover. Exit the “Standby” mode by pressing Dimension Spas ICON
logo
®
for 5 seconds. After cleaning, run the pump for a few minutes at high speed, then return to the heating
mode.
To clean the
UltraPure
™ filter cartridge, remove the E-Z Lock Filter cartridge by twisting the cartridge ¼
turn counterclockwise to its stop. Then lift the filter out of its canister. Clean the cartridge with a high-
pressure garden hose. Every other cleaning, soak the cartridge in Dimension One Spas’
Cartridge Cleaner
,
then rinse it thoroughly, and reinstall. Replace the access lid or cover.
Exit the “Standby” mode by pressing
Dimension Spas ICON logo
®
for 5 seconds.
39
