26361065_V_1_0.DOC
18/20
10. BASS Control
Used to boost or lower the LOWs.
11. REVERB Control
With the reverb control you can gradually add reverb to your overall sound.
12. HEADPHONE Socket
Use this socket to connect your headphones.
13. POWER SWITCH with LED
Press this button to start operation. The corresponding LED lights up.
14. EFFECT SEND Socket
Connect this socket to the input of an external effects device.
The PGA-35R’s Effect Send socket is located on the rear panel.
15. EFFECT RETURN Socket
Connect this socket to the output of your effects device (e.g. your DIMAVERY Wah-Wah-Pedal).
The PGA-35R’s Effect Return socket is located on the rear panel.
4.3 Rear panel PGA-65R
16. FUSEHOLDER
Only replace the fuse when the device is disconnected from mains. Only use fuses of the same rating and
power.
17. AC INPUT Socket
Used to plug in the power cord.
18. FOOTSWITCH Socket
Used to connect your footswitch via a stereo plug.
4.4 Connections
Occupation jack plug:
Unbalanced use of
mono 1/4" jack plugs
Tip =
Signal (+)
Sleeve =
Ground / Shield
Tip
Sleeve
Strain relief clamp
Balanced use of
Tip =
hot (+)
Sleeve =
Ground / Shield
Tip
Sleeve
Strain relief clamp
stereo 1/4" jack plugs
Ring =
cold (-)
Ring
For connection of balanced and
unbalanced plugs, ring and sleeve have
to be bridged at the stereo plug.
