Dilog DCT-280, Operating Instructions Manual

Page: 60 / 71

26
9.2 Terrestrial Scan
In automatic channel search choose your region, search range and the logical
channel (if available), then start the channel search using the RED key. If all
values of the channels are known then choose Manual channel search and enter
the following values.
• Search Mode: Choose Auto for
automatical Searching of all available
Frequencies. If you prefer to search
single Frequencies, choose manual.
• Region: With the Regional settings
you can change the geographical and
cultural value.
• HF Chanel: Use the NAVIGATION
Keys LEFT and RIGHT to change the
RF-channel number.
• Search Range: Use the
NAVIGATION Keys LEFT and RIGHT
to toggle between All Channels, Free-To-Air or Scrambled Channels.
• Logical Channel: By setting the option to „On“ the sequence of channels in your
channel list changes according to what has been determined by your operator.
Should your network not provide this function, please switch this option to „Off“.
•
Antenna Booster : If you have connected an active antenna that requires 5V
Power supplied by the receiver, choose “on”, otherwise choose “off”.
10 USER SETUP
Please use the cursor keys to select:
- Language Setting,
- Time Setting,
- Parental Control,
- A/V Control,
- OSD Setting,
- Automatic Power Down.