The speed unit of measure is shown by an LED at right of window, either in/min or
mm/min. To toggle between the units, press and keys at the same time.
#3 MOVE Crosshead
The GTS-1000 crosshead travel is controlled by the MOVE Keys.
To begin the crosshead in an UPWARD direction, depress
×
.
To begin the crosshead in a DOWNWARD direction, depress
Ø
.
The corresponding LED is lit while the stand is moving.
The crosshead will not move in a given direction if it is against a limit switch stop.
CAUTION
The GTS-1000 is an extremely quiet stand in
operation and others may not be aware when the
stand is moving. The operator must remain
monitoring when crosshead is in motion.
PRECAUTION
To avoid accidental crosshead movement, power off
the stand or engage the emergency stop when
unattended.
To stop a moving crosshead press either
×
or
Ø
key or the emergency stop button.
Emergency stop button
The GTS-1000 Series features an emergency stop button conveniently located at the
top of the console. This can be used as a panic switch whenever conditions are
becoming a concern. Engaging the emergency stop is also a good precaution to avoid
inadvertent crosshead movement when the stand is unattended.
When emergency stop button is depressed, motor control is removed from the tester.
The crosshead will stop, all annunciators light and “Stop” is displayed in the speed
window. To activate, press firmly downward. The stop button will latch and lock into
position.
To release the emergency stop button, gently turn in a clockwise direction. This will
disengage the lock and return the stop button to its normal position. You will see a
green band below the red stop button and the speed will return to normal display. The
stand will remain stopped until
×
or
Ø
is depressed.
Travel limits
The GTS-1000 Series has two adjustable mechanical travel limits that restrict the
working travel range of the stand.
12
