6
Pedal assist levels
Use the + and - buttons to adjust the level of the pedal assist (PAS) while you’re riding. There are different
PAS level ranges to choose from, and the default PAS level range is 0-9.
The higher the PAS level you select on the display, the more power assist you get from the motor while
you are pedaling. When the PAS level is set to 0 the PAS is deactivated and the motor will not assist you
while you’re pedaling.
The battery icon on the display represents an indication of the charge level of the e-bike battery. When
the battery icon is full and solid blue, it means that the battery is (close to) full. The blue indicator in the
battery icon will go down as the battery depletes, and will start flashing empty when the battery is close
to being depleted.
Battery level indicator
Error codes
The components of the e-bike are continuously and automatically monitored. When an error is detected,
the respective error code is indicated on the display as shown below. Please refer to the error code table
further in the manual for more information on the error codes.
There are various parameters that can be adjusted to personalise your display, which are divided into
Display Settings and Advanced Settings.
Examples of these parameters are things like rim size, number of PAS levels, trip meter clearing, etc.
More details on each of these settings are explained in this manual.
To access the parameter settings press and hold down the + and - buttons at the same time, while
the bike is not in use. You will see the screen shown below and you can select the Display settings or
Advanced settings.
To toggle between the different options, use the + and - buttons by shortly pressing them. To select an
option, shortly press the on/off button.
- TRIP Reset
You can use this setting to clear the trip meter. Please note that you can only reset the trip meter, not
the odometer.
To reset the trip meter, change this setting from NO to YES! and the trip meter will be reset.
- Toggle Unit
With this setting you can change the speed and distance readout of the display from kilometers to
miles. The default setting is metric.
Summary of Contents for KD218
Page 10: ...10 Wiring diagram Error codes ...
