Dillenger CONVERSION KIT User Manual Download Page 17 | Manualshive

Page: 17 / 27

Dillenger CONVERSION KIT User Manual Download Page 17

17

2. The next wire to join is the RPAS sensor

to the controller. These wires are colour
coded yellow.
3. Now connect the Wiring Loom to the
controller. These wires are colour coded
with a black plug.
4. The male yellow plug from the wiring
loom goes to the throttle.
5. The two female yellow plugs from the
wiring loom go to the E-Brake sensors.
6. Lastly the green plug from the wiring
loom joins with the wire coming from the
LCD display.

Wiring Install Continued

Tidy Up

In the final stage of the installation, it’s time to tidy up the wires and make everything look

nice and neat.
In the adjacent images, you can see the provided zip/cable ties being used to bundle and

secure the cables coming from the base of the battery/controller, RPAS and anything else

leading up to the handlebars.

Also included in this kit is a protection pipe which can be used to group multiple brake/

gear cables together to make for a neater appearance.

«
...
15
16
17
18
19
...
»

Summary of Contents for CONVERSION KIT




























Reviews:

No comments