4
Caution:
Please ensure that the appliance is not connected to the charger before use. If the
appliance is charging or at low battery status, it will not start.
USING THE APPLIANCE
To Attach the Combined Crevice Nozzle:
1:
Take out the Extension Tube from the appliance.
2:
Attach the Nozzle into the appliance directly.
To Detach the Combined Crevice Nozzle:
1:
Grasp the appliance’s main unit handle.
2:
Press the Extension Tube Release Button, and pull out
the Nozzle.
Disconnect
1
2
Connect
USING THE VACUUM CLEANER IN HANDHELD
1:
Take out the appliance’s main unit, Extension Tube and
Floor Brush.
2:
Attach the Extension Tube into the Suction Inlet of the
appliance’s main unit and you will hear a “click” when
the Extension Tube is assembled correctly.
3:
Attach the Floor Brush with the Extension Tube. You will
then hear a “click” when the Extension Tube is assembled
correctly with the Floor Brush.
ASSEMBLING THE UNIT
CHARGING THE BATTERY
1:
Place the appliance near an electrical power outlet and plug in the charger.
2:
Connect the charger to the charging socket. The battery status indicator lamp will illuminate to
indiciate that the appliance is properly connected to the charger and that the unit is being
charged. When it is fully charged, all of the four lamps will light up.
The battery status indicator light will blink when the battery capacity is running low.
The appliance will not start while it is charging.
