Setting the Temperature Units:
a. The default temperature unit is Celsius degrees (°C).
b. To switch to Fahrenheit, press and hold the
“SET”
button. You will see
“ENGLISH” flashing.
c. Press the
“SET”
button 7 more times to scroll through the other
settings. You will see °C flashing.
d. Press
“UP”
or
“DOWN”
to switch from Celsius to Fahrenheit.
e. Press
“SET”
to confirm your selection and exit.
Setting the nap time:
a. In normal time mode, press
NAP
button to enter nap mode, the time
begins to countdown.
b. In normal time mode, press and hold
NAP
button to enter nap time
setting, the nap time starts to flash, use
“UP”
or
“DOWN”
buttons
(press and hold to fast adjust) set the required nap time.
c. The nap time range: 5~120 minutes, the default nap time are 10 minutes.
Indoor temperature and humidity:
1. Indoor temperature -10°C ~ 49°C (14°F ~ 120.2°F), display LO°C
when below -10°C and display HI°C when higher than 49°C.
2. Temperature resolution: 1°C
4. Indoor humidity range: 1%-99%, display 1% when below 1% and
display 99% when higher than 99%.
5. Humidity resolution: 1 %RH
7. When alarm ringing, temperature and humidity test will be stopped.
Español
English
The sound
of button
Hour
Minutes
Year
Month
Date
Temp. unit
Snooze
Nap
Alarm
Alarm type
Everyday
Monday
to Friday
Weekend
Charging
display
turn alarm off
display
German
Español
German
English
Language
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
Accuracy:
1. Temperature accuracy: 0°C ~ +49°C: ±1°C
-10°C ~ 0°C: ± 2°C
2. Humidity accuracy: +/- 5 % RH (@25°C , 30%RH to 50%RH);
+/- 10 % RH (@25°C , 1%RH to 29%RH, 51%RH to 99%RH)
USB charging function:
a. In normal time mode, using the USB charging function, the LCD will
display “HELLO” for 3 seconds.
b. When the battery in charging, the icon “ ” starts to flash.
c. When the battery is full, the LCD will display “ ” icon
NOTE:
This function must use the USB line as the main power supply.
Back Light:
When the display unit is powered by battery only the back light will be off
to preserve the battery. Press the
SNZ/LIGHT
button to turn the back
light on for 10 seconds.
When the display unit is powered by the USB line the back light will always
remain on. Press the
SNZ/LIGHT
button to adjust the brightness of the
back light: HI
→
LO
→
OFF.
Low Battery Indicator:
If the low battery indicator is displayed on the LCD for the display unit,
immediately change the batteries to prevent disruptions in communications
of the devices.
Display unit placement:
Place the display unit in a dry area free of dirt and dust. Display unit
stands up right for tabletop/countertop use.
Different languages display:
