flashing calibration value , then load corresponding weights value,
until the balace return to zero after remove the weights, which means
that the linear calibration is complete.
V. Funtion of Counting
1.Counting
In standby mode of the balance(with the container should be peeled) it
dilplays “0.000”, press the “PCS” key, “10” flashes, the lower right
corner displays “g” convert to “pcs”. If a higher count accuracy
required, in the beginning enter into count mode(displays “10”
flashes), each press “CAL” key there is a value to be set (various
between 10-20-50-100-150-200-250-500), then select a certain
value, put the corresponding object counted, short press “PCS” key, to
enter into the counting function of the value.
2. Short press the “PCS” key to exit the counting functions and restore
the standby mode.
Ⅵ
. Unit Conversion
Short press “UNIT” key, it display “ct’, “oz”, “lb”, “tl”, “gn”, “ozt”,
“dwt”, “g” for every press.
-3-
