Digium, Inc.
Page 30
Chapter 2: Card Installation
The TE205P/207P card is a 32-bit 33MHz card keyed for 5.0 volt
operation and works in any PCI 2.2 (or higher) compliant slot which
supports 5.0 volts. This means that in the motherboard shown in Figure 9,
the TE205P/207P card will fit into Slots 1 and 3. The TE205P/207P will
not fit into Slot 0 (AGP slot) or Slot 2.
The TE210P/212P card is a 32-bit 33MHz card keyed for 3.3 volt
operation and works in any PCI 2.2 (or higher) compliant slot which
supports 3.3 volts. This means that in the motherboard shown in Figure 9,
the TE210P/212P card will only fit into Slot 2. The TE210P/212P will
not fit into Slots 1 or 3.
The TE220/TE220B card is a PCI Express card. Slot 4, illustrated above,
is a 1 lane (X1) PCI Express compliant slot. The TE220/TE220B will
work in any PCI Express compliant slot, including lane lengths X4, X8,
and X16. This means that in the motherboard shown in Figure 9, the
TE220/TE220B will only fit into Slot 4. The TE220/TE220B can not be
used in Slots 1 through 3.
