Digium, Inc.
Page 33
Chapter 2: Unit Installation
Gateway Series appliance. The default username for the Gateway
Series web GUI is admin, and the default password is admin.
Note: The Gateway Series appliance may also be accessed by its
hostname. The hostname will be in the format of Gx00-aa-bb-cc,
where x is 1 for G100 or 2 for G200, aa is the 6th to last and 5th to last
alphanumeric of the unit’s MAC address, bb is the 4th to last and 3rd
to last alphanumeric of the unit’s MAC address, and cc is the 2nd to
last and very last alphanumeric of the unit’s MAC address. The MAC
address of the Gateway Series appliance is printed on a label on the
back of the unit. For example, if the MAC address of a G200 Gateway
Series appliance is B2432B187135, the hostname will be G200-18-71-
35. HTTPS (e.g. https://[IP]) must be used. If you do not connect
using HTTPS, a browser error will be displayed.
3.
It is highly recommended that the admin password be changed using
the System Administrators menu on the web GUI.
4.
Next, the IP configuration options should be configured on the
Gateway Series appliance. See IP Configuration on page 35.
Connecting via Statically assigned IP address
1.
If a DHCP server does not exist on the network that the Gateway
Series appliance will be placed on, connect one end of an Ethernet
cable to the Gateway Series appliance's Ethernet port, and the other
end to an Ethernet connection on a computer. That computer will
need to use the network configuration listed below. This step will
connect your Gateway Series appliance to your computer so that the
