Release 1.05
Digium, Inc.
Page 57
Chapter 3: Telephone System Configuration
The LAN tab is used to specify the settings for your local network. A
local network is usually a smaller network which is part of a WAN. The
information specified here is used to access your Asterisk Appliance. The
default IP address specified, 192.168.69.1, is used to access the
AsteriskGUI. You can change this address to an IP address specified in
the IP start and end ranges. In most cases, the default should be used.
The Timezone tab is used to specify the default timezone for your
appliance. You must load the time zone file from the cd which came with
your Asterisk Appliance. To load the time zone file, click Browse and
then browse to the file on the cd. The time zone files are located in the
timezone/zoneinfo section of the cd sent with your Asterisk Appliance.
Select the appropriate file (i.e. timezone/zoneinfo/America/Chicago for
Central time) on the cd and then click Upload. The time zone file will be
uploaded to your appliance and will be listed on the Timezone tab page.
Click Set as Default to set the set the time zone as your default time zone.
You will need to restart your appliance in order to complete setting the
time zone as your default. Click Home to return to the home page. Click
Save Configuration first to insure that all of your changes have been
saved. Then click Reboot to restart the appliance.
Note: The time zone files are named after cities that adhere to the time
zone you need.
Click Activate Changes in the upper right corner of the page to make
your changes immediately available. You can then test your changes to
insure that they work. If you are happy with the results, return to the
Home page and click Save Configuration to make the changes
permanent.
