Digitus WIRELESS 300N AUTO INSTALLATION USB ADAPTER, User Manual

Page: 86 / 88

86
4-2 Troubleshooting
Don’t panic if Presentation Server is not function properly! In most cases, you
can solve the problem by yourself and you don’t have to send the Presentation
Server back to dealer of purchase to ask of help. Please refer to this
troubleshooting table to find out possible solution.
Scenario Solution
Can’t connect to
Presentation
Server
1. Check the LED lights located at the front of
Presentation Server. If ‘Power’ LED does not light, do
the following check:
Check the connection of A/C adapter, and if the
electrical outlet you used with A/C adapter is
functioning properly.
Press ‘Power’ button to see if ‘Power’ LED lights
now.
2. If ‘Ready’ LED does not light after you switch the
Presentation Server on after more than 2 minutes, ask
the dealer of purchase for help.
3. Check the network connection.
4. Make sure you connected to correct IP address.
5. If you’re using wireless network, make sure you
connected to correct SSID.
6. If you’re using wireless network, check the WEP /
WPA password.
Remote controller
does not work
1. Replace the battery of remote controller with a new
one (CR-2032 lithium battery).
2. Please point the IR transmitter (located at the top of
remote controller) to the front panel of Presentation
Server.