Digitus WIRELESS 300N AUTO INSTALLATION USB ADAPTER, User Manual

Page: 17 / 88

17
1-6 Install Wireless Presentation Server
Please follow the following instructions to get the Presentation Server installed:
1. Unpack the Wireless Presentation Server’s package, and make sure no item
in the package is missing.
2. Stick the foot pads on the 4 locations indicated on the picture shown below if
you plan to put the Presentation Server on the desk or other horizontal places.
You can skip this step if you plan to hang the Presentation Server on the wall,
and use the 2 wall-mounting holes located at the bottom of the Presentation
Server to do this.
3. Connect the Ethernet cable to the LAN port (this port is labeled as ‘LAN’ and
located at the back of this Presentation Server)
4. Insert the audio cable which connects with external amplifier / speaker to
‘Audio Out’ port located at the back of this Presentation Server.
You can skip this step if you don’t have external audio amplifier / speaker.