6
For Windows® Vista
In Windows® Vista, when the system is booted up it automatically
detects the Gigabit Ethernet PCI Express Card and install the Gigabit
Ethernet PCI Express Card with in-build drivers. Following is the
procedures for upgrading Gigabit Ethernet PCI Express Card driver
under Windows® Vista operating system.
1.
Please insert the CD driver bound with Gigabit Ethernet PCI
Express Card into your CD-ROM Drive.
2.
At the Windows desktop click
Start
, then
Run
.
3.
Type
D:\ DN-1013-1\Vista\setup.exe
, then click
OK
. (Change
D:\
to match your CD-ROM drive letter)
4.
Follow the on-screen instructions to complete the instructions to
complete the installation to complete the installation.
5.
Restart Windows to complete the installation.
Verify Driver Installation
Click on the
“Device Manager”
tab in System Properties, which you
access from the Windows Control Panel. You should see an
“Realtek
RTL8168/8111 PCI-E Gigabit Ethernet NIC
(Windows®
2000/XP/Server2003” or
Realtek RTL8168/8111 Family PCI-E
