Installation
1.
Connections
[NOTE]:
It is recommended to power from the receiver unit
2.
Bi-directional IR pass back
1)
It supports bi-directional IR pass back. User can control DVD at RX
end and control TV at TX end.
2)
If control at RX end, please connect IR blaster extension cable
with IR OUT of TX and connect IR receiver extension cable with IR
IN of RX. If control at TX end, please connect IR receiver extension
cable with IR IN of TX and connect IR blaster extension cable with
IR OUT of RX.
3.
RS232 serial bi-direction passback function
1)
Baud rate
Different encoding mechanism cannot mix-connect, the baud rate of
RS232 serial of these transmitter unit and receiver unit, support 4800,
9600, 19200, 28800, 38400, 57600, and 115200
2)
Line order
Check and make sure the RS23S serial line connect firmly and well,
and make sure serial data line is connected correctly as below:
If the RS232 serial does not work by following above connection,
please try to change the order of TXD line and RXD line.
DVD
Sender
Receiver
TV
IR IN
IR IN
IR OUT
IR OUT
