background image

 

2

INTRODUCTION 

The USB Keyboard and Mouse Console Switch provides a user to control two 

computers and associated display screens by using a mouse to move the cursor and 

switch without the panel select buttons.    It is great to work easily between your 

computers by a set of keyboard/mouse.

 

 

 

 
FEATURES 

The Switch allows a user to view and access one computer while also allowing the user 

to view the other "non-accessed" computers.    You can use keyboard Hot Keys and 

Mouse Keys to switch between your computers.    *The Switch also features a Mouse 

to move the cursor for enabling quick and seamless navigation between both your 

computers without any lag. 

 

*Need to install provided software. 

 

 

SPECIFICATIONS 

 

Host Interface 

USB 2.0 

PC Port 

USB A-Type (M) Cable x 2 (1.2m), USB 1.1/2.0 compatible

USB Device Port 

USB A-Type (F) Cable x 2 (10cm)

 

Operating System Support 

Windows 2000 SP4, XP SP2, Vista 32-bit/-64bit, Mac OS 
10.3 and up

 

Compatible USB Device 

Standard Keyboard and Mouse

 

Power Mode 

Bus Power

 

Module Weight 

Approximately 89g

 

Dimension 

Main body without cables: 50 (L) x 25 (W) x 13 (H) mm

 

Operating Temperature / HR 

0~40  ; 10~95% 

Storage Temperature / HR 

0~60  ; 0~95% 

Power Consumption 

5V / 105mA (Maximum)

 

Safety, EMI 

FCC, CE 

RoHS 

RoHS compliant 

* Specification is subject to change without further notice.    Patent pending.

Summary of Contents for DS-16100








Reviews: