8
6.
Installing and Connecting the Switch
This part describes how to install your PoE Ethernet Switch and make
connections to it. Please read the following topics and perform the
procedures in the order being presented.
6.1 Installation
Please follow the following instructions in avoid of incorrect installation
causing device damage and security threat.
Put the Switch on stable place or desktop in case of falling damage.
Make sure the Switch works in the proper AC input range and
matches the voltage labeled on the Switch.
To keep the Switch free from lightning, do not open the Switch's
shell even in power failure.
Make sure that there is proper heat dissipation from and adequate
ventilation around the Switch.
Make sure the cabinet to enough back up the weight of the Switch
and its accessories.
Desktop Installation
Sometimes users are not equipped with the 19-inch standard cabinet.
When installing the Switch on a desktop, please attach these cushioning
rubber feet provided on the bottom at each corner of the Switch in case
of the external vibration. Allow adequate space for ventilation between
the device and the objects around it.
6.2 Rack-mountable Installation in 19-inch Cabinet
The Switch can be mounted in an EIA standard-sized, 19-inch rack,
which can be placed in a wiring closet with other equipment.
To install the Switch, please follow these steps:
