5
6.
Hardware installation
6.1 switch installation
For safe switch installation and operation,
it is recommended that you:
Visually inspect the power cord to see that it is secured fully to the AC power
connector
Make sure that there is proper heat dissipation and adequate ventilation around
the switch.
Do not place heavy objects on the switch.
Desktop or Shelf Installation
When installing the switch on a desktop or shelf, the rubber feet included with the
device must be attached on the bottom at each corner of the device's base. Allow
enough ventilation space between the device and the objects around it.
Rack Installation
The switch can be mounted in an EIA standard size 19-inch rack, which can be placed
in a wiring closet with other equipment. To install, attach the mounting brackets to
the switch's side panels (one on each side) and secure them with the screws
provided (please note that these brackets are not designed for palm size switches).
Then, use the screws provided with the equipment rack to mount the switch in the
rack.
