Power socket
Connect the female connector of the power cord here, and the
male connector to the AC (Alternating Current) power outlet.
Please make sure the voltage of the power supply meets the
requirement of the input voltage
Grounding column
The switch already comes with lightning protection mechanism.
You can also ground the switch through the PE (Protecting
Earth) cable of AC cord or with Ground Cable.
Installation of the Switch
This part describes how to install your Ethernet Switch and
make connections to it. Please follow the following instructions
to avoid incorrect installation causing device damage and
security threat.
Before cleaning the switch, unplug the power plug of the
switch first. Do not clean the switch with wet cloth or
liquid
Do not place the switch near water or any damp area
Prevent water or moisture from entering the switch
chassis
Do not place the switch on an unstable case or desk.
The switch might be damaged severely in case of a fall
