Hardware Description
Front Panel
The Front Panel Consists of Ethernet Ports. The LED indicators
are also located on the panel.
DIP Switch
The DIP switch located on the left panel.
Default:
T
he factory default mode, normal communication
between port 1~10.
VLAN:
Port 1-8 are isolated to stop broadcast Storm and
increase forwarding rate of frame but can
communicate via uplink port 9 and 10
CCTV
Up to
250m PoE distance allows you to expand you
network via Ethernet cable to where there is no
power Line or outlet. Network speed will be
reduced to 10Mbps
Note: After change the mode, in order to make the
corresponding configuration take effect you need to manually
restart
