4
3 Turn on switch
Please connect the AC power cord into the rear of the switch and to an electrical outlet (preferably one that is grounded).
When the switch is power on, the LED indicators flash momentarily for one second which represents a resetting of the
system. The Power LED indicator turns on green.
Note: Please confirm the voltage is correct before power on; otherwise the switch will be damaged.
(The power input is: 100V-240Vac, 50/60Hz.)
4 Console Port Interface
The switch has a monitor port (Console port). Rate 1200bps-115200bps, standard RJ45 plug.
Use a dedicated monitoring cable to lead the port to the PC serial port connection, as follows:
The RJ45 connector used by the Console port is shown in the figure below, and the RJ45 plug corresponds to the RJ45
socket, from left to right numbered from 1 to 8.