3
Power socket
Connect the female connector of the power cord here, and the male connector to the AC (Alternating Current) power outlet.
Please make sure the voltage of the power supply meets the requirement of the input voltage.
Grounding column
The switch already comes with lightning protection mechanism. You can also ground the switch through the PE (Protecting
Earth) cable of AC cord or with Ground Cable.
Installation of equipment
Announcements
To prevent equipment damage and personal injury caused by improper use, please observe the following precautions:
Before cleaning switch should switch power supply plug pulled out. Do not use wet cloth to wipe the switch;
do not use liquid to clean the switch;
Do not switch on the water or wet places, and prevent water or moisture from entering the switch chassis;
Do not place the switch box in unstable or table, in case of fall, will cause serious damage to the switch;
Should maintain good indoor ventilation and keep the ventilation holes of the switch open;
Switch to the proper voltage to work properly, make sure the switch working voltage matches the voltage indicated;
To reduce the risk of electric shocks, switches, do not open the enclosure, even in neutral situations or don't turn on
the switch chassis.
1 Desktop installation
Placed the bottom of the switch on large enough and stable desktop;
Tear off pad surface of the paste that comes with random paper; paste the pad to switch the Groove at the bottom of
the housing to prevent external vibrations; reset the switch on the Workbench cautiously.
2 Rack Installation
Check EIA-19inch machine Cabinet of grounding and stability, first, with screws will installation hanging ear fixed in switch
front Panel sides will switch placed in machine Cabinet of a bracket, along machine Cabinet guide slot Mobile switch to right
location, then, with screws will installation hanging ear fixed in machine Cabinet ends of fixed guide slot, ensure switch
stable to installation in machine Cabinet slot bit of bracket. Equipment mounting brackets are not used for load-bearing; it
only plays the regular role. When installing the equipment cabinet, box bottom bracket (fixed on the Cabinet) to support the
device.