Digitus DN-7060 Quick Installation Manual Download Page 2

1. Product Introduction 

Congratulations on purchasing this Wireless N ADSL2/2+ Router. This router 

is a cost-effective ADSL2+ router, with the combination of an ADSL2+ modem, 

router, Ethernet network switch and wireless access point, you can surf the 

Internet through your ADSL2/2+ broadband connection without investing other 

devices. 

 

This router can support downstream transmission rates of up to 24Mbps and 

upstream transmission rates of up to 1Mbps. It supports PPPoA (RFC 2364 - 

PPP over ATM Adaptation Layer 5), RFC 1483/2684 encapsulation over ATM 

(bridged or routed) and PPP over Ethernet (RFC 2516) to establish a 

connection with ISP. The product also supports VC-based and LLC-based 

multiplexing. 

 

With built-in IEEE 802.11b/g/Draft-N wireless network capability, all computers 

and wireless-enabled network devices (including PDA, cellular phone, game 

console, and more!) can connect to this ADSL router without additional cabling. 

New Draft-N wireless capability also gives you the highest speed of wireless 

experience ever! With a compatible wireless card installed in your PC, you 

can transfer file for up to 300Mbps (transfer data rate)! The radio coverage is 

also doubled, so don’t worry if your office or house is really big! 

 

Utilizing the web management interface, users can easily configure the 

various functions of the router including DHCP server, NAT, virtual server, 

DMZ, access control, IP/MAC/Application/URL filter, Firewall, 

PPTP/IPSec/L2TP pass-through, DDNS, UPnP, Wireless and etc. 

 

This router is a high performance and high-speed device that provides a full 

rate of ADSL2+ standard with the superb reliability and a complete solution for 

home and office application. 

 

 

 

 

Summary of Contents for DN-7060


















Reviews: