9
1.6 Modem / Hub + Modem
You may use your laptop / PC to complete the network configuration of the camera.
Before configuring this camera on your laptop / PC, make sure:
Your Windows operating system is Windows 7, Vista or XP.
You have changed the IP address of your laptop / PC to “
192.168.1.
xxx
”, where
xxx
could be 0~255 except
10.
Note:
To know how to change the IP address of your laptop / PC, please refer to “APPENDIX 1 CHANGE
IP ADDRESS OF YOUR LAPTOP / PC” at page 14.
Step1: Disconnect your laptop / PC from the hub or modem, and connect it to this camera with a network cable.
Note:
Make sure the IP address of your laptop / PC is changed to “
192.168.1.
xxx
” (1~255 except 10).
To know how to change, please refer to “APPENDIX 1 CHANGE IP ADDRESS OF YOUR LAPTOP /
PC” at page 14.
Step2: Open the web browser, such as Internet Explorer, on your laptop / PC, and enter
“http://192.168.1.10:88” on the URL column to access this camera.
In the login page, enter the user name, password, and security code to access.
Note:
The default user name and password for remote access are both “
admin
”.
Step3: The wizard starts to analyze your network environment. When it’s completed, select “Next” to go to the
following pages to change the default password for access safety, check the current date and time, and
complete network configurations.