7
Before configuring this camera on your laptop / PC, make sure:
Your Windows operating system is Windows 7, Vista or XP.
(Recommended) Your router supports UPnP, and this function is enabled.
Note:
If your wireless router doesn’t support UPnP, you need to additionally access your router for port
forwarding. For details, please refer to “APPENDIX 4 CONFIGURE PORT FORWARDING” at page
19.
You have noted down the IP address of your router.
Note:
For details, please refer to the user manual of your router, or check with your installer.
You have downloaded “IPScan.exe” in your laptop / PC.
Note:
Please download “IPScan.exe” from
www.surveillance-download.com/user/m328a.swf
.
Step1: Connect your laptop / PC to the router.
Step2: Open “IPScan.exe” ( ) to search your camera. The default IP address of the camera is 192.168.1.10.
If you connect two or more cameras to the same router, “IPScan” will list many cameras with different IP
addresses after searching. To know which camera you’re configuring, you may identify each with its
unique MAC address.
Note:
The MAC address can be found on the sticker at the bottom side of the camera.
Step3: Select the IP address you want to configure, and click “Configure” to show the IP setting page, and
change the IP address, gateway and port number.
For example, the IP address of your router is
192.168.2.1
. Then in this step, you need to change the IP
address to
192.168.2.xx
(“
xx
” means any value from 2 ~ 50), and change the gateway to “
192.168.2.1
(the same as the IP address of your router). Then, change the port number to any value other than 88 if
needed.
Note:
Make sure the IP address you change is not used by other devices connected to the same router.
Step4: Enter the user name and password of this camera to confirm the change, and exit “IPScan”. The default
user name and password are both “
admin
”.
Step5: Open the web browser, such as Internet Explorer, on your laptop / PC,
and enter the IP address you just set on the URL column to access this camera.
In the login page, enter the user name, password, and security code to access.