manualshive.com logo in svg

Digitus DN-16054, Installation Manual, Page: 10 / 20

Share
Download
Digitus DN-16054 Installation Manual Download Page 10

 

9 

3.2 Network Configurations via Wizard 

A quick installation wizard is available via your web browser for password change, date & 

time settings, and network configurations.   

 

For details about the wizard, please refer to “3.2.1 Setting in Wizard” at page 9. 

 

For details about DDNS setting for PPPoE and DHCP, please refer to “3.2.2 DDNS 

Setting” at page 11. 

Note:  You can also change the settings in the system configuration page via your 

web browser later. For details, please refer to “5. ACCESSING THE CAMERA 
VIA WEB BROWSER” in the user manual. 

3.2.1 Setting in Wizard 

Step1: Open your web browser, for example, Microsoft Internet Explorer, and enter 

“

http://192.168.1.10

” in the URL address box. 

Step2: In the login page, key in the default user name (admin) and password (admin), 

and enter the security code from the image below. Then, click “LOGIN”. 

 

Step3: The wizard is then starting analyzing your network environment, and shows your 

network environment. Select “Next” to continue. 

 

Step4: In “Account”, change the access password if needed.   

If not, leave all the columns blank, and select “Next”. 

Summary of Contents for DN-16054





















Reviews:

No comments