Item
Description
E-Mail Subject
Specify the subject of sending email.
Recipient E-Mail
Address
Here lists all email addresses you set.
New
Click this button and you’ll be prompted to input the email
address. Click ‘OK’ to save changes.
Edit
Select an email address from ‘Recipient E-Mail Address’
box, and click ‘Edit’ to edit the email address.
Delete
Delete selected email address.
Sender E-Mail
Address
Specify the email address of email sender.
SMTP Server
Specify the IP address or host name of the SMTP server you
wish to use. For most of ISPs they will only allow its
subscriber to use their SMTP server, if you don’t know which
SMTP server you should use, please refer to the setting of
your email software or ask your ISP / network administrator.
SMTP port
Specify the port number of the SMTP server you wish to use
here. By default (and the setting of most of SMTP servers)
it’s ‘25’.
SMTP Auth
Select ‘Enable’ if your SMTP server requires authentication,
select ‘Disable’ if it’s not required. If you don’t know if your
SMTP server requires authentication, please refer to the
setting of your email software or ask your ISP / network
administrator.
SMTP Account
Input the SMTP account (username) of your SMTP server
here. In most cases, it’s the same with your POP3 username
(the one you used to receive email). Please refer to the setting
of your email software or ask your ISP / network
administrator if you’re not sure about this.
SMTP Password
Input the SMTP password of your SMTP server here. In most
cases, it’s the same with your POP3 password (the one you
used to receive email). Please refer to the setting of your
email software or ask your ISP / network administrator if
