11
1.5 Client Installation and Setup
The Client Installation Program is a wizard driven
procedure which will perform the following tasks:
Install
client
utilities
and drivers into your PC.
Automatically
add
all
Network Ports to your
PC.
The network port driver supports network protocol auto-
detection. It will automatically select an available
network protocol (TCP/IP, IPX or NetBEUI) of the client
computer to connect to the print server.
Since both the print server side and client side support
multi-protocols, the configuration process of the client
side is fully automatic.
After the installation, perform the standard “Add Printer”
procedure and choose the print server’s “Network Port”
in the “Available Ports” list. You can test printing from
the PC to the print server as your local printer.
The Client Installation can be performed on Windows
95/98SE/Me/NT/2000/XP/2003 with the same user
interface. Before installation, please confirm that your
PC has already connected to the network and installed
at least one network protocol. Please follow the steps
below to start installation.
