Chapter15 Init Button
The Init button is used for:
1.
Print Configuration Report: Press Init button for exceeding 3 seconds and
then the connected HP printer or PCL supported printer will print out the
system configuration.
2.
Maintenance: Simultaneously press Init button and turn on (by plugging
in the power adaptor) the Server until USB1 and USB2 LED indicators
simultaneously blink. After that, the Server will do the following tasks:
A.
Perform a Factory Default of the MFP server, which will restore most of the
parameters and settings to factory default values,
B.
Perform a TFTP server. You can upgrade new firmware using any TFTP
client tool.
Note: After performing the tasks mentioned above, you have to plug off the
power adaptor and then power on the power adaptor to restart the Server.
77
Summary of Contents for DN-13005
