32
3.3.3 Routing Table
This function allows you to add routing rules into DN-11007-N. It is useful if you connect
several computers behind DN-11007-N to share the same connection to Internet. Follow
the steps.
3.3.3.1 Static Route
Please follow the instructions to complete the setup of Static Router.
Select
Routing Table
in the
IP Config
menu.
DN-11007-N supports
two
Routing modes, Static Route
and Dynamic Route. Follow the instructions to enter the
Routing Table page.
Tips are given when you move your cursor over
※
each item.
1.
Network/Host IP
It stands for the destination network or host of a route rule. So it could be a host
address
192.168.123.11
or a network address, such as
192.168.0.0
.
2.
Netmask
It stands for the netmask of an added network route. If the destination is a host, its
netmask should be
255.255.255.255
.
3.
Gateway
It stands for the IP address of gateway where packets are routed to. The specified
gateway must be reachable first. It means you have to set up a static route to the
gateway beforehand.
4.
Add
Input data into first row of table, then press
Add
to insert it. System will remind you if
the table is full or required fields are not filled ok.
5.
Del
Select one entry in table, or press
Ctrl
and select multiple entries in tables, then press
Del
to delete them.
6.
Help
If you don
’
t know how to do it, please click
Help
for more information.
