4
Connect to Computer
1.
Connect one end (type C) of the USB cable into the USB Port of
your HDD external enclosure.
2.
Connect the other end of the USB cable into any active USB port of
the computer.
3.
Let Windows search and install the driver automatically.
4.
Open “My Computer” to see your external hard drive ready to use.
NOTE:
If the external hard disk is a new disk drive which has not been
partitioned, please refer to the Partition the External Hard Disk
chapter to prepare your USB external disk.
NOTE:
To enjoy USB 3.1 super speed up to 10Gbps, your computer must be
equipped with built-in USB 3.1 ports, or a USB 3.0 host PCI-e card
If the external hard disk is a new disk drive which has not been
partitioned, please refer to the
Partition the External Hard Disk
chapter
to prepare your USB external disk.
Drivers Installation
Windows 2000/ XP/VISTA/ 7/8/10
The product is supported by Mass Storage Device within
WINDOWS2000/XP/VISTA/7/8/10 system directly you do not need to
install any drivers. When the USB External Drive is used for the first
time your PC system will detect a USB Storage Device and
automatically install the drivers for [USB Mass Storage Device] from
the installed system.
