Installation 2:
1. Place one 3.5" HDD into
the mounting bay on the top side of the
DIGITUS
mounting frame.
2. Screw the HDD to the
DIGITUS
mounting frame from underneath through
the decouplers using the included coarse thread screws.
3. Place two 2.5" HDDs/SSDs into the mounting bays on the lower side of the
DIGITUS
mounting frame.
4. Screw both HDDs/SSDs to the
DIGITUS
mounting frame from both sides
using the included
fi
ne thread screws.
The
DIGITUS
mounting frame can be mounted to standard 5.25" bays of PC
cases and is attached with four
fi
ne thread screws.
Installation 3:
1. Open the PC case.
2. Slide the
DIGITUS
mounting frame with pre-installed HDDs into a 5.25"
mounting bay of the case. Refer to the installation guidelines included with
the case.
3. Screw the
DIGITUS
mounting frame to the case using the included
fi
ne
thread screws. Refer to the installation guidelines included with the case.