Switch Status
EDID information
switch-1 switch-2 switch-3
0 0 0
720P@50Hz
2.1CH
1 0 0
720P@50Hz
7.1CH
0 1 0
1080i@60Hz
2.1CH
1 1 0
1080i@60Hz
7.1CH
0 0 1
1080P@60Hz
2.1CH
1 0 1
1080P@60Hz
7.1CH
0 1 1
read and save the EDID of the
loop-out TV
1
1
1
Default EDID: 720P@60Hz 2.1CH
Switch UP: use the Arabic numeral “1” to represent
Switch DOWN: use the Arabic numeral “0” to represent
FAQ
Q:
No image output or audio and video display is not normal?
A:
Press receiver “LENGTH” button for adjusting this unit to
self-adapt to the length of network cable.
Q:
Receiver “LINK” led is flashing all the time?
A:
1)
Make sure network cable connection follows the standard of
IEEE- 568B.
2)
Check whether TX has HDMI signal input.
3)
Reset TX&RX and reconnect.
Q:
RX “LINK” led lights on all the time but no image output?
A:
1)
Press RX “LENGTH” button for adjusting to the length of
network cable
2)
Make sure HDMI cable is well connected with TV.
3)
Make sure the network cable is fine copper wires.
