Models: db Nexus II, Nexus III Digitus Biometrics, Inc. 2011
Page 7 of 20
Connecting the Power Source to the Control Unit
Please ensure that you have a power outlet near the control unit
which will ONLY be used to supply power to the control unit.
ONLY the transformer supplied by Digitus should be used to power the control unit
(or an exact equivalent).
•
Strip approximately ¼” (6mm) of plastic sheath from each cable to the power supply and connect to the
appropriate terminal blocks, checking that all wires are securely fastened.
•
If you previously removed the battery (as recommended), please reinstall it and fasten securely.
•
Reconnect the battery as shown below.
