Digitronic
CamCon Terminal
Automationsanlagen GmbH
DC51/T
5.1.5. Menu "4 Terminal config."
You select this menu, in order to configure the terminal.
Before you can continue, enter your user key with the
access to the device configuration. If you did not assign a
user key, enter the keycode "5693" and press the key
.
Afterwards the submenu in the screen, represented right,
appears.
5.1.5.1. Sub menu "Terminal konfig."
You select this menu, if you want to adjust the
communication mode and the CamCon terminal unit
number. The communication mode becomes here by the
designation "
Term mode
" and the unit - and/or device
number by the designation "
Terminal no
." shortened.
For the selection of the communication mode by pressing
of the keys
and
the desired communication mode
is selected and taken over by the pressing of the key
.
If the assumption took place, then now the input of the Terminals No. or device number is expected.
Also this is taken over with the key
and can vary between 0 to 63. The specification of the individual
terminal modes takes place in the next chapter
Press the
key once to return to the main menu.
5.1.5.2. The communication mode or terminal mode (Ser.Mode)
The CamCon Terminal offers five different communication modes. These are 1. = "Cam-BUS", 2. =
"Standard", 3. = "Multiuser" 4. = "S5-L1" and 5. = "3964R". If a specific mode is selected, make sure
that every device with which you want to communicate supports that communication mode. Please
note that you have the option of selecting the type of interface you want with your offer: DC51/T4 =
RS485 or DC51/T2 = RS232. All five comunicationmodes work as well in the RS232 point to point
comunication as in the RS485 BUS comunication.
5.1.5.2.1. The "Cam-BUS" communication mode
Select this setting, if wish to be able to program and display one or more CamCons from different
terminals. This is e.g. the case, if you want the Camcon Terminal DC51/T4, the daughter display CD10
and the PC to communicate with one or several devices via an RS485 BUS.
Attention:
With this setting,
all
CamCon devices and connected PCs with an RS485 interface have
to be equipped with a software version from December1996 or later.
Version: Jul. 04
Page: 10
2 rue René Laennec 51500 Taissy France
Fax: 03 26 85 19 08, Tel : 03 26 82 49 29
E-mail:[email protected]
Site web : www.hvssystem.com
