Operator's Manual
DS7A - Constant Current Stimulator
D185-TCx - Trigger Cables
All DS7A - EMG-system will require one Trigger cable.
Trigger cables with different connectors are offered to synchronously link the DS7A with a recording system.
The correct operation of the trigger link should be confirmed before the “system” is used in practice.
A number of Trigger cables are offered. These will be increased as and when necessary. Please refer to the
“Connection of the DS7A to an EMG System” section of this manual for more details of the cable required
and connection details.
D185-TC1
Trigger Cable (BNC - 3.5 mm) 1.5 m (5 ft)
Use:
To trigger Nicolet Viking III or IV from DS7A.
D185-TC2
Trigger Cable (BNC - SMB) 1.5 m (5 ft)
Use:
To trigger DS7A from Nicolet Viking III or IV.
D185-TC3
Trigger Cable (BNC - BNC) 1 m (3 ft)
Use:
Standard BNC-BNC connector used for triggering with most other monitoring systems.
Digitimer Ltd.
38 of 58
Copyright © 2014
File Ref: N:\Docs\Company\Manuals\DS7A\Issue-14\DS7A-iss14.odt
Last Revised: February 1, 2017
