Digitimer Ltd – D360R-4 Operator’s Manual
Version 1.0
27
Digitimer Ltd.
Copyright ©2021
8.
Once a D360R-4 is detected and communication with the host PC established, the Control
Panel should become populated with the settings of the connected amplifier(s).
9.
If the amplifier front panel does not load, check the power/error LEDs, cable connections
and try an alternative USB port.
10.
Correct installation of the D360R-4 may be confirmed by examining the device entry in
Windows Device Manager, where it should be listed under Ports as a “Digitimer Device Serial
Port” (see below).
