according to the previous setting value until 5 minutes.
Delay function
Damage can occur if the compressor restarted too soon after
shutdown. This feature forces the compressor to wait for a few
minutes before restarting.
During the waiting time, the display will flash
, When the safe
waiting time has elapsed, the display stop flashing and the compressor
turns on
How to set
1. Press and hold the SET button until the corresponding value flashes.
At the same time, the
is displayed on the LCD. Press the
or
button to change the number. Short press SET button to
set next valve, or long press the SET button to exit and save. use this
method to set the RUN /STOP /Delay/ HIGH /LOW value
respectively. Or after setting all the parameters, press and hold the
SET button to exit and save. When no operation time is greater
than 30 seconds in the setting state, the exit setting mode is not
saved.
NOTE, in the setting state, long press the UP or DOWN button to
continuously to change the setting value
