Weak signal
Strong signal
Signal searching
Signal lost
No sensor
Indoor temperature
HI and LO alert
Indoor humidity
HI and LO alert
Outdoor temperature
Hour Rainfall
Day Rainfall
HI alert
HI alert
HI and LO alert
Area
Type of Alert available
Hour rainfall
Day rainfall
Week rainfall
Month rainfall
Year rainfall
Outdoor Temperature
Indoor Temperature
Indoor Humidity
Hour/Day/Week/Month/Year rainfall
Max.
Min.
Max.
Min.
Max.
Max.
Min.
Area
Type of memory
Total Rainfall SINCE function
Press
[ SINCE ]
button to display the total rainfall record. The connecting data and year will be shown.
To clear the existing commentary date and reset it to re-start again, press and hold
[ SINCE ]
. The total rainfall will now
be equal to TODAY rainfall and the unit will start again to collect the rainfall data.
To Select the Measurement Unit for the Rainfall
1. Slide the
[ MM/IN ]
switch to
<MM>
position to select millimeter unit.
2. Slide the
[ MM/IN ]
switch to
<IN>
position to select inch unit.
HISTORY DATA OF ALL RECORD
Data logger stores and gathered data to display rainfall according to your selected time-scale (current status, past 24
hours, past 31 days, past 52 weeks, past 12 months or past 5 years)
To check history data:
1. Press
[ RAIN ]
button to select rainfall display modes.
2. Press the
[ HISTORY ]
button to read the data.
The LCD will display the past indoor temperature & humidity, outdoor temperature, value of rainfall and their time and date.
NOTE:
The main unit can check the records according to the time and calendar of the clock, i.e. it can check the records of the past, but can not
check the records in the future.
E.g. The main unit recorded data from Jan. 1st, 2012 to Feb. 31st, 2014. Then time is set to be Jan. 1st, 2013. It can only check the data
of 2012.
TEMPERATURE DISPLAY
User may select temperature unit by sliding the
[ °C / °F ]
switch.
MAXIMUM / MINIMUM MEMORY FUNCTION
To Check the Memory
Press
[ MEM ]
button repeatedly to check the maximum/minimum records.
NOTE:
When maximum or minimum reading is displayed, the corresponding timestamp will be shown.
To Clear Individual Records
While displaying the maximum/minimum records, press and hold
[ MEM ]
button for 2 seconds to clear the individual record.
HI / LO ALERT
HI/LO are used to alert you of certain weather conditions. Once activated, the alarm will turn on and red LED starts
flashing when a certain criterion is met. The following are areas and type of alert provided.
NOTE:
*
Daily rainfall since midnight.
To Set the HI / LO Alert
1. Press the
[ ALERT ]
button until the desired area is selected.
2. Use
[ UP ]
/
[ DOWN ]
buttons to adjust the setting.
3. Press
[ ALERT ]
button to confirm and continue to next setting.
To Enable / Disable the HI / LO Alert
1. Press
[ ALERT ]
button until the desired area is selected.
2. Press
[ ALARM ]
button to turn the alert on or off.
3. Press
[ ALERT ]
button to continue to next setting.
NOTE:
1. The unit will automatically exit setting mode in 5 seconds if no key is pressed.
2. When ALERT alarm is on, the alert LED indicator, the area and type of alarm that triggered the alarm will be flashing and the alarm will
sound for 2 minutes.
3. To silence the Alert alarm beeping, press the
[ SNOOZE/LIGHT ]
button, or let the beeping alarm automatically turn off after 2 minutes.
WIRELESS SIGNAL RECEPTION
The wireless sensor is capable of transmitting data wirelessly over an approximate operating of 150m range (line of sight).
Occasionally, due to intermittent physical obstruction or other environment interference, the signal may be weaken or lost.
In the case that the sensor signal is lost completely, you will need to relocate the display main unit or the wireless sensor.
