Making Connections
The Whammy DT pedal is extremely easy to set up and use. Follow these steps to get up and run-
ning.
1.
Connect your instrument to the instrument
Input Jack
.
2.
Connect from the Whammy’s
Output Jack
to your favorite distortion pedal or to your amplifier.
3.
If using an external MIDI device for control, connect from the MIDI out of the MIDI device to the
Whammy’s
MIDI Input
.
4.
Connect the included power supply to an AC outlet and the other end to the Whammy’s
Power
Input
.
5.
Turn on your amp and adjust the volume to the desired level.
6.
Use the
WHAMMY
and
DROP TUNE Footswitches
to enable the desired effects, then rotate
the
WHAMMY
and
DROP TUNE Knobs
to select the desired effects.
Output
Summary of Contents for Whammy DT
Page 1: ......
