background image

These symbols are internationally accepted symbols that warn of potential 

hazards with electrical products. The lightning flash means that there are 
dangerous voltages present within the unit. The exclamation point 

indicates that it is necessary for the user to refer to the owner’s manual.

These symbols warn that there are no user serviceable parts inside the 

unit. Do not open the unit. Do not attempt to service the unit yourself. 
Refer all servicing to qualified personnel. Opening the chassis for any 

reason will void the manufacturer’s warranty. Do no get the unit wet. If 
liquid is spilled on the unit, shut it off immediately and take it to a dealer 

for service.

Disconnect the unit during storms to prevent damage.

If you want to dispose this product, do not mix it with general household waste.  There is a 
separate  collection  system  for  used  electronic  products  in  accordance  with  legislation  that 

requires proper treatment, recovery and recycling.

Private household in the 25 member states of the EU, in Switzerland and Norway may return their used 

electronic products free of charge to designated collection facilities or to a retailer (if you purchase a similar 

new one).
For Countries not mentioned above, please contact your local authorities for a correct method of disposal.
By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery and 

recycling and thus prevent potential negative effects on the environment and human health.

ELECTROMAGNETIC COMPATIBILITY 

This device complies with part 15 of the FCC Rules and 

the Product Specifications noted on the 

Declaration 

of Conformity.

Operation is subject to the following 

two conditions:

• 

this device may not cause harmful

interference, and 

this device must accept any interference received, 

including interference that may cause undesired 

operation. 

Operation of this unit within significant

electromagnetic fields should be avoided.

use only shielded interconnecting cables.

Summary of Contents for Whammy DT

























Reviews: