SECTION 4 - EFFECTS AND PARAMETERS
About the Parameter Matrix
The Parameter matrix displays all the effects and parameters available in the RP-3. The parameters are arranged in rows and columns. Use the
Parameter select keys to navigate the matrix. The effects and their parameters are as follows:
The RP-3 offers a classic wah wah effect, which can be used with or without distortion for that classic wah-wah sound. The effect can be
controlled with the expression pedal.
Wah
Turns the Wah on and off.
Type
The Wah types include; 1. being full-range and 2 through 7 move from darker to lighter tones.
Amount
This parameter is a manual setting to control the wah effect. This parameter can be modified manually
using the RP-3’s parameter keys to perform the wah function. As the parameter is modified, the tone of
the original note will change. Ranges 0 to 99.
The RP-3’s Compressor can be used to increase sustain and to tighten up guitars, and is particularly useful on clean sounds. Parameters of
the RP-3 compressor are as follows:
Compressor
Turns the Compressor on or off.
Amount
Controls the amount of compression applied to the signal. Higher settings yield a tighter, more focused
sound, while lower settings allow better dynamics. Ranges from 1-Lo to 96-Hi.
Compressor
Parameters
Displayed Values
On/Bypass
O n - b y
Amount
L O - 1 . . . 9 6 - H I
Wah
Parameters
Displayed Values
On/Bypass
O n - b y
Type
? ? ? ? ?
Amount
0 . . . 9 9
1 . . . 7
RP-3
User Guide
Section - 4 Effects and Parameters
9
Summary of Contents for RP 3
Page 6: ...RP 3 User Guide IV ...
