5) Mode LEDs
- Indicates whether the RP-3 is in Program or Bank mode.
6) Parameter Select Buttons -
The
<LEFT>
and
<RIGHT>
Parameter buttons allow you to navigate the horizontal parameter LEDs of the
Parameter matrix. The
<UP>
and
<DOWN>
Parameter buttons allow you to navigate the vertical effect LEDs of the Parameter matrix.
These keys are only active in Edit mode.
7) Output Level
- Controls the overall output level of the RP-3. Also controls the overall level of the headphones.
8) Presence -
Enhances the high frequency content of the overall sound. This will affect all presets.
9) Expression Pedal -
This volume-type pedal allows real time control over Parameters in the RP-3.
The Rear Panel
1
) Input
-
Plug in your instrument here.
2
) Jam-A-Long Jack
-
Connect a CD or Cassette player headphone output here for either Jam-A-Long or Learn-A-Lick use. Uses a standard 1/8"
stereo plug.
3) Right Main Output
-
This is the RP-3’s right main audio output. Use both left and right main outputs to take advantage of stereo effects.
4) Left(Mono) Output
-
This is the RP-3’s left main audio output. This output should be used when using only one output.
5) Headphone Output
- 1/4” stereo plug for headphones. The headphone level is controlled by the main output level knob.
6) AC Line Input
-
This is the AC power adapter receptacle. Use only the included PS 750 power supply.
7) Strain Relief Clip
-
This holding clip is used to secure included power supply cord.
2
3
4
5
6
1
7
Section 1 Introduction
RP-3
User Guide
4
Summary of Contents for RP 3
Page 6: ...RP 3 User Guide IV ...
