29
2
Important notes
Please read these instructions before using the device!
Be sure to observe chapter 2.1 Technical data
•
This computer is a mounting part! The mounting has to be carried out in accordance with
DIN EN 60950, VDE 0160, VDE 0113 and VDE 0750 (DIN EN 60601-1).
•
The computer corresponds to class of protection 1.
The PE conductor of the supply connector is connected to the metal housing of the device.
•
In order to switch the device to a deenergised state, the supply voltage connector has to
be removed.
•
The device may only be opened by qualified personnel.
See chapter 4 Mounting,
installation
•
The short-stroke keyboard and display integrated in the flat display computer do not
comply with the ergonomics directive ZH 1/618. The keyboard and display only are
designed for short-term entries and control functions.
•
The sealing ring of the front panel of the flat display computer is to be protected against
UV radiation when stored.
•
In the case of a defect the device is to be returned to the manufacturer with the following
address (for reshipment, please use the original packaging!):
Lenze Digitec Controls GmbH, Germany
Grünstraße 36 • 40667 Meerbusch
Phone +49 – 2132 / 9904 – 0
Homepage: http://www.lenze-digitec.de
E-mail: [email protected]
